880 XL

880 AXL

The Lincoln windrow elevator will provide a continuous flow of material to the paver resulting in increased production and improved material handling, continuous paver operation without stopping for truck exchanges, and reduced trucking costs. Continuous operation improves ride quality by eliminating stops and starts and problems associated with truck exchanges.

The unique remixing auger re-blends asphalt materials just before they are delivered to the paver hopper eliminating segregation and ensuring a uniform mix temperature.

 Standard Features

Proven reliable design
Hydrostatic drive system
72" wide - high capacity slat conveyor
Remixing auger to re-blend asphalt materials to eliminate segregation
74" discharge height for full hopper load
High speed raise and lower to clear obstructions and speed setup
Rear wheel width allows loading on trailer


Hydraulic Telescope Hookup
Hydraulic Plow
Swing-out Hydraulic Heat Exchanger (EZ Clean)
Wireless Remote
Material Modifier (patented)

Lincoln 880 AXL

Cummins - Tier 4(i) 6 Cylinder 173 HP Diesel Engine*
Manual Telescope Hook up
Manual Tow Bar and Siderack Adjusting Screws
80 gal. Fuel Tank/55 gal. Hydraulic Oil Reservoir
Bolt on Hydraulic Heat Exchanger (stationary)

Conveyor start up warning alarm
72" wide throat
6'-2" discharge height
Heavy duty roller flight chain
Heat treated flight wear edges
Replaceable two-segment drive chain sprockets
Replaceable hardened floor liner
High carbon alloy cutting edges (adjustable)
Heavy duty head and tail shafts with heavy duty bearings
Reversible elevator to clear obstructions

Adjustable up to 24" to position dump point
Adapter fits most pavers

Four wheels have heavy duty caster assemblies
Rear caster pin for towing
Two 8.25 x 15 - 18 ply pneumatic rear tires
Two 6.90 x 9 Solid Rubber front tires
Swing up towing frame with pintle ring

Engine Instrumentation (Ground Level)
Auger on Reverse (left-side)
Auger trough hydraulic lift (easy clean out) (left-side)
Control panels on both sides of the machine include:
Emergency Stop
Engine increase/decrease
Pump increase/decrease
Cylinders up/down

Variable displacement pump is directly connected to the engine and drives two fixed displacement hydraulic motors with planetary gear boxes directly connected to conveyor head shaft.
Auxiliary mounted gear pump drive lift cylinders and optional features
55 gallon reservoir with large capacity heat exchanger

High speed raise & lower to clear obstructions
10" clearance in up position
Left and right height locking screws (manual)

Length (with wings folded in)13' - 0'
Height 10' - 6"
Travel Width 9' - 6"
Rear tires width outside/outside of tread in loading position 8' - 0"
Front tires stationary width outside to outside of tread 9' - 7"
Operating Width 11' - 0"
Weight 18,000 lbs.

*subject to change